The great thing about Lightkey is that there is a wizard on the top of the screen that will be able to walk you through the setup process. The icons located on the left side of the screen are for you to design your stage. Once you have set up the fixtures you will be brought to the screen to start creating and designing your stage. You can even drag and drop your fixtures if you prefer. You can either request to have the fixture added through Lightkey’s website or you can simply bring in an SSL2 file and add it yourself.Īfter adding your fixture, just set up the patching information, and then add. Using the search bar you can find your fixture but if it’s not listed you can have it added two separate ways. Not only is the library great but it’s also very easy to add a fixture that is not listed in the library. Another thing I really like about Lightkey is the fixture library. Next, you will be able to patch in your fixtures. Once you have decided on the output type you can just select it and set up your network. If you’re not sure which one to start with be sure to check out this article: How Do I Setup My First sACN or Art-Net Device? If you are using a basic ethernet control I do recommend using sACN. You will have the options for USB, Art-Net, sACN, or ESP. Once you start your new project you will be brought to a screen to set up the DMX Settings. What I really like about Lightkey is that it is very simple to get started with. Then you can title the project and click “Save”. To start a new show or project you want to click “New Project” on the splash screen. You can check out the demo version here! New Project With any program, I would highly recommend checking out the demo version to see if you would like it or not. This is the screen that you will be brought to regardless if you are purchasing it or trying the demo version. and then you can test it there as well on DMX output, fader, and test the channel of your light fixture.When launching Lightkey you will be brought to the splash screen. Select your device, and then update the firmware. Install the package, and go to Application, find Pro Manager (if it doesn't show up, try unzip the package and reinstall again, happened to me)Īnd it should open up in a browser (ie. I'm on OSX10.10 so I download the second newest one. On the right hand side, download the Pro Manager. My solution was to update the firmware for my Enttec DMX USB Pro! So in preference, dmx output, it would show DMX USB Pro option but if I click on it, it won't show me any actual device that's available (ie. I was using Max 5,6,7 and Madmapper and the device isn't being recognized. I've spent a good few hours trying to solve this problem as well. You should see the serial/firmware version of your decice Select ENTTEC, the device listed above, receive mode Mac-pro-de-david-geldreich:~ dgeld$ ls -al /dev/tty.usbserial*Ĭrw-rw-rw- 1 root wheel 10, 6 21 jan 15:22 /dev/tty.usbserial-ENQEJNRZ Vendor ID: 0x0403 (Future Technology Devices International Limited)Ĥ) verify that the driver created a /dev entry : Mac-pro-de-david-geldreich:~ dgeld$ system_profiler SPUSBDataType Here are the steps to ensure that you FTDI driver is well installed.ġ) plug the ENTTEC DMX USB Pro on an USB port (one with enought power to drive this device)Ģ) verify that the driver loads after plugging it in using Applications|Utilities|Terminal You should not use D2XX drivers but VCP (virtual com port drivers).
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |